Product categories

Smart Camera
> Zebora Cam
> Yoosee Cam
ZEBORA BIO-Probiotic
Solar Charger

Yoosee Cam


ZEBORA YSW8 P2P Pan & Tilt Wireless IP Surveillance Camera

Product Specification

  • Lens pixel1.0 megapixel
  • ResolutionHD 1280 x 720 (720P)
  • Focal Lengthf = 3.6mm
  • Lens view angle69°
  • Pan/Tilt Angle355°/120°
  • Night vision distance40ft
  • Audio input/outputTwo-way audio
  • MemorySupports up to 64GB micro SD card
  • Motion DetectionAlert on your phone
  • Description
  • Customer Reviews
  • Question & Answer
YSW8 is a great WiFi smart camera, you will enjoy it once the camera connect with WiFi, so the quick setup as well as the video record setup are the most important, as below:

I. Cellphone/Tablet Setup
Make sure your cellphone/tablet is connected with Wi-Fi.
1. Search “Yooee” App from Apple Store (for iOS user) or Play Store (for Android user) and install in your cellphone/ tablet. Register an account and log in. (Other android users, just go to “Download Center ” to download the “software for android”)
2. On the top right corner, click “+” and choose “Smartlink”. Now plug in your camera and wait for 20 sec until you hear “Di-Di-” from the camera (Must hear the voice before next step). Click “Next”.
3. Manually input the Wi-Fi password correctly (*in case, if you choose default wireless password, make sure to delete an empty space at the end). Click “Next”.
4. You will hear “Ding” once the camera detects the Wi-Fi. About 25 sec,“Setting Success” pops up. Click “Ok”, and camera ID pops up.
5. Please input camera password “123”. Click “Save”. Your camera now is nected to Wi-Fi. Click image icon to play video. Swipe the screen to control the camera remotely.
* If the Wi-Fi connection failed, reset the camera: press the reset button for 5 sec. After 30 sec, you will hear “Di-Di-”, then repeat step 3 to 6.

II. Multiple Cellphones/Tablets Setup
* Must be the first step to connect the camera with Wi-Fi.*Must use one Yoosee account for one device only.
1.You must register another Yoosee account for second device.
2. Log in Yoosee account in second device:
* If the device connects with the same Wi-Fi as the camera.“Discover 1 new device” pops up, click it and input the camera password (If you don’t reset password, it is “123”). Click “Save”to add the camera to your Yoosee device list.
* If your device does not connect with the same Wi-Fi as the camera.
You can click “+” on the top right corner, choose “Manual” to add
. Input a camera name you like in the first line; and input the camera ID (located at the bottom) in second line and camera password last line. Click “Save” to add the camera to device list.If it shows “Offline” when you open the app in your daily use:Please pull the “device list” page and hold (until you see “loading”)for seconds to refresh it.

III. PC (Windows only) Setup
*You can only set up the PC after your camera is connected to Wi-Fi.1. Go to, in “Download Center>>App Download”
1. download CMS for Windows PC (Not Mac) and intall it. Click “CMSClient”icon on your desktop.
2. You can choose one of the two Login modes
*Local Login: User: admin (case sensitive),Password: 00000000 (Eigh“0”)
*Remote Login: use your cellphone/tablet yoosee account
3. After log in, click on the left to add device, then input your camera ID next to the 3C ID. The camera ID is located at the bottom of the camera (7 digits). Input your camera password (If you don’t reset the password, it is “123”). Change the vice name (Optial). Click “OK”.
4. Double click the device name under the device list on the left panel to start or stop connecting to your camera. Click the four arrow panel on the left to control the camera.
* If you cannot connect your camera in current login mode, just log out and choose another login mode.
5. There are multiple monitor screens. One screen is for one camera.Double click to get full screen, and double click again to return.

IV Video Record Setup
For Cellphone/Tablet
*You need to have a micro SD card, it supports up to 64GB.
1. Insert the SD card into the slot behind the camera.
2. Open “Yoosee”, click the camera name, and “ Playback, Settings, Edit ”pops up:
3. Click “Settings” >>Date and Time. Set the camera “date and time”to your local date and time, click “Apply”; Set the “Timezone” to your local timezone (refer to Page 9), click “Apply”. Go to “Storage info”to “Format/Erase SD card”.
4. Remove the SD card and insert again ( Very important step ).5Settings”>>Record Settings”, turn on “Record Switch”.
5. Click “Playback”, you can play the recorded videos after 30~60 min (Video will be saved automatically in “Playback” every 30 min).
For PC
* No micro SD card needed for recording.
1. Log in CMSClient, click and change the “File Save Path” for video recorded. Find the �ile where you saved the videos and play.
2. On the top panel of the video screen, you can choose.